How to use

Graminae wheat, barley, oat, corn, rice, sorgo, millet, white millet, etc.

1. Coating the seeds before seeding: 1 lt. ekstrasol is prepared in 5-10 lt. water as a solution and mixed into seeds of 1 ton via spraying.

A. Purpose: To increase the germination percentage, to provide bushy and strong growth, to protect the seeds from bad weather conditions and stress.

B. Fertilizer coating time: 1 to 30 days before planting.

C. Purpose: Increase the percentage of sodding; ensuring vibrant and solid growth and protecting seeds from adverse weather conditions.

2. Fertilizing during growth: 200 ml ekstrasol is prepared as a water solution to be put onto 1 decar and distributed with a machine.

A. Purpose: Increase the efficiency, improve the quality, increase the ratio of wheat gluten and amorphous ratio (the products will be ready for harvesting one week earlier). Quality and high efficiency is obtained.

B. Fertilizing time: The first fertilizing is realized at the beginning of tilling or when the plants have 2-4 leaves (corn, sunflower, etc.); the second fertilizing is realized at the beginning of bolting or with 15 days intervals (corn, sunflower, etc.). The amount is 200 ml water solution for each decar for fertilizing. This fertilizing may be used with drugs such as herbicides, fungicides, insecticides. This does not affect the result. In case that the water is not removed for rice, the fertilizing can be realized on the surface of the water.

NOTE: The solution amount is adjusted according to the capacity of the current machine. Yet, 200 ml ekstrasol is applied to a decar always.

*** In case that the seeds are drugged in the phase of purchasing seeds, the effects of ekstrasol are not prevented. It is covered with fertilizer.

Sunflowers, cotton, sugar beets, tobaccos, canolas, sesame seeds, rapitsa, fennel, anaseeds, etc…

1. Coating the seeds before seeding: 1 lt. ekstrasol is prepared in 5-10 lt. water as a solution and mixed into seeds of 1 ton via spraying.

А. Purpose: Increase the percentage of sodding; ensuring vibrant and solid growth; causing generation of strong roots and adapting the same from stress.

B. Fertilizing time: 1 and 20 days before seeding and mixed and ventilated.

C. Additional effect: the seeds are protected against disruption and cold weather conditions.

2. Fertilizing during growth: 200 ml ekstrasol is prepared as a water solution to be put onto 1 decar and distributed with a machine.

А. Purpose: Increase the efficiency; improve the quality, ensuring resistance for air conditions. The plants are prepared for harvesting 1 week to 10 days beforehand.

B. Fertilizing time: This is applied in 2-4 leaves phase and 15 days afterwards. The amount depends on 30-40 lt. or machine. The second fertilizing is realized 15-20 days afterwards with same dose.

Note: The vegetable products are ready for harvesting earlier.

*** In case that the seeds are drugged in the phase of purchasing seeds, the effects of ekstrasol are not prevented. It is covered with fertilizer.

Beans, soybeans, chickpeas, peas, horse beans, lentils, peanuts, etc.

1. Coating the seeds before seeding: 1 lt. EXTRASOL is prepared in 5-10 lt. water as a solution and mixed into seeds of 1 ton via spraying.

А. Purpose: Increase the percentage of sodding; ensuring vibrant and solid growth; causing generation of strong roots and adaptingthe same from stress.

B. Fertilizing time: 1 and 20 days before seeding and mixed and ventilated. 

2. Fertilizing during growth: 200 ml EXTRASOL is prepared as a water solution to be put onto 1 decar and distributed with a machine.

А. Purpose: Increase the efficiency; improve the quality, ensuring resistance for air conditions. The plants are prepared for harvesting 1 week beforehand.

B. This is applied in 2-4 leaves phase and 15 days afterwards. 

*** In case that the seeds are drugged in the phase of purchasing seeds, the effects of ekstrasol are not prevented. It is covered with fertilizer.

Tomatoes, aubergines, peppers, turnips, carrots, leeks, celeries, cabbage, brocolli, cauliflower, garlic, onion, parsley, dittander, etc

1. Seedy plants: Coating seeds before planting for seedling: 100 ml. EXTRASOL  is prepared with 10 l. water for 1 kilogram of seeds and dipped into the solution for 20-30 minutes. In case that the amount is lesser, 20-30 ml EXTRASOL solution is prepared in 1 lt water and the seeds and dipped into the solution for 20-30 minutes and then ventilated and sow.

А. Purpose: Ensuring high ratio of seeding for seeds; growing strong and bushy seedling. The tender
sprouts are adapted to stress-cold and cool weather.

B. Fertilizing time: It may be realized before 1-20 days before seeding. The soil is fertilized with 200 ml ekstrasol water solution before seeding. The solution amount depends on the location to be seeded. In case that sowing without seedling is realized, the sowing is realized after seeds are fertilized.

2. Fertilizing during growth: The Seedlings; fertilizing time: The first fertilizing is realized with 2-4 leaves, the second fertilizing is realized 1 week before sowing into the field. For fertilizing processes, 200 ml esktrasol water solution is prepared and used on 1 decar or 30-40 ml EXTRASOL is prepared in 10 lt solution and implemented for fertilizing. The sowing is realized by dipping the roots into the solution for sowing seedlings. Purpose: Development of seedlings strongly and richly. Faster growth and adaptation after being sowed into the field.

А. Fertilizing in the field: 1 week after being sowed, 200 ml ekstrasol solution is applied for each decar and the second fertilizing process is realized 15 days after the first one. The fertilizing is conducted before flowering, during fruiting and third bouquet flowering. The fertilizing doses are the same. 200 ml EXTRASOL water solution is applied to the decar. In case that the location is smaller, 30-40 gr esktrasol is put into 10 lt of water and fertilizing is realized

B. Purpose: Strong growth of plants with high quality and efficiency. The harvesting begins 1week to 10 days beforehand.
Sowing Bulbous Vegetables

3. Coating the bulbs. All bulbs are pulverized into 1 ton of 1 lt ekstrasol 5-10 lt water solution. In case that the amount is lesser, they are dipped in 200 ml EXTRASOL solution for 20-30 minutes and then sown. 20-30 gr esktrasol is added to 1 lt water.

A. Purpose: Growing stronger plants, obtaining more and higher quality products.

B. Fertilizing time: First fertilizing process is realized at 2-4 leaves phase, the second one is realized 15 days after the first and 200 ml EXTRASOL water solution is applied for each decar.

*** In case that the seeds are drugged in the phase of purchasing seeds, the effects of EXTRASOL are not prevented. It is covered with fertilizer.

The fertilizing is realized in two phases in vineyards.

1. Early – before the vineyards wake and During development of vineyards.

A. Purpose: Ensuring that the sprouts growing will be stronger and grow faster thanks to early fertilizing; protecting the same from the cold from spring.

B. Fertilizing time: Before cutting vineyards or just after cutting. In case that the timing is not suitable or there is a delay, the fertilizing is realized without waiting for the cutting process. The fertilizing is realized as 200-300 ml EXTRASOL per 1 decar.

2. Fertilizing during development phase of the vineyards.

А. Purpose: Ensuring that the sprouts grow faster and stronger; more efficiency is obtained, and more sugar is acquired in the grapes and entering harvesting 1 week or 10 days beforehand.

B. Fertilizing time: Firstly before flowering, then 15 days after flowering and then the grains reach the size of soya bean, 300 ml EXTRASOL is applied per decar with water solution. The other fertilizing processes are realized with 300-400 ml EXTRASOL solution per decar with 15 days intervals. The fertilizing is realized at the beginning of clearing of pieces for table grape. Both the ratio of sugar increase and the grapes become resistant during transportation. The sticks of vineyard grow riper.

В. The ratio of sugar increase for grapes between 2% to 5%.

3. The last fertilizing process is realized after the vineyard is harvested; the leaves decay faster. The dose is 200 ml ekstrasol water solution per decar.

NOTE: The amount of solution is adjusted according to the machine. The important thing is to use 200 ml EXTRASOL per decar.

Fruit trees and other arboreal types (hazelnut, raspberry, blackberry, etc.)

1. The fertilizing is realized in two phases for fruit fields:
At sleeping phase of trees (before sprouting)

A. Purpose: Ensuring that the newly growing sprouts are stronger, grow faster and protected against cold of spring with early fertilizing of trees.

B. Fertilizing period: Before trimming or just after trimming trees. In case that the timing is not suitable or there is a delay, the fertilizing is realized without waiting for cutting.
The fertilizing is conducted with 200 ml ekstrasol water solution per decar.

2. Fertilization during development of trees:

A. Purpose: Growing strong sprouts swiftly, higher efficiency, more sugar and vitamin from fruits and realizing the harvest 1 week earlier.

B. Fertilizing time: Firstly before flowering, then 15 days after flowering and then the grains reach the size of soya bean, 300 ml EXTRASOL is applied per decar with water solution. The other fertilizing processes are realized with 300-400 ml EXTRASOL solution per decar with 15 days intervals. Both the ratio of sugar and vitamins increase, and the friuts become resistant during transportation.

1. Coating them before sowing: 1 lt EXTRASOL 5-10 lt water solution is sprayed on the potatoes. In case of smaller amounts, a proportionate amount is calculated.

A. Purpose: Ensuring strong sprouting and good rooting for plants. Allowing weather stresses to be easier.

B. Fertilizing time: The fertilizing must be done 1-20 days before sowing.

2. Fertilizing during Growth Phase: The fertilizing is done when plants have 2-4 leaves and trunks grow with 200 ml

A. Purpouse: The plants fertilized with ekstrasol keep the potato bug out of the field.

NOTE: The solution amount depends on current machine capacity. The important thing is to use 200 ml for each decar.

1.Preparation of Location: During the preparation of the soil, the soil is fertilized and mixed and then the sowing is realized. 100 m2 is fertilized with 100 ml ekstrasol water solution.

Before sowing-seeding, 200 ml EXTRASOL water solution is prepared and fertilized after the compost is sterilized.

A. Purpose: Acquisition of plenty and quality products with equal sizes and colours.
During harvesting: 100 m2 is fertilized with 100 ml EXTRASOL water solution before they grow out.

1. Flowers with Seeds or Bulbous Flowers: Coating the seeds: 1 ton of seeds are dipped in 200 ml EXTRASOL water solution for 20-30 minutes or
30-40 ml solution in 10 lt water is applied. In case that the flowers are bulbous, they are dipped in
the same solution for 20-30 minutes. The soil is fertilized with same solution before sowing.

А. Purpose: Strong sprouting for seeds and bulbs; higher percentage of sodding; faster growth; stronger root structures; easier adaptation to stresses; longer period of being fresh.

2. During seedling phase: 200 ml EXTRASOL water solution is applied at first 2-4 leaves. For smaller amounts, 30-40 ml solution is applied for 10 lt water. The roots are dipped in the same solution before sown into the garden or pots.

3. Fertilizing during growth: 200 ml EXTRASOL water solution is applied 1 week after sowing and the same dose is applied 15 days afterwards. For potted flowers, the fertilizing is realized with watering each month.

A. Purpose: Strong, fast and solid growth, giving many lowers and resilience and resistance for the flowers.

1. Purpose: Acquiring high and quality efficiency, big strawberries with typical colours. Fertilizing: Seedling and soil.

2. The fertilization is realized with 200 ml ekstrasol water solution per decar where the seedlings will be planted at. The roots of seedlings are dipped into the same solution before sewn into the soil. The seedlings have stronger roots and easily survive the cold.

3. Fertilizing during Development: The fertilizing is realized with 200 ml EXTRASOL water solution per decar during early spring when strawberries are green cones; the flowers are growing in pink and just after flowering. Total of 2 to 3 fertilizing processes are sufficient.

A. Purpose: Strong sprouting for seeds and bulbs; higher percentage of sodding; faster growth; stronger root structures; easier adaptation to stresses; longer period of being fresh.

Note: In case that the fertilizing is realized before the fruits are collected, the strawberries will stay fresh during transportation and in the market for longer periods.

1. HAZELNUT: EXTRASOL is best applied with 200-300 ml water solution per decar before flowering and 15 days after flowering for hazelnut.

A. The amount of water to be used depends on the current pump type. The amount of water per decar shall have 200-300 ml EXTRASOL in it. The spraying shall be realized as aerosol.

B. Benefits: Increase the efficiency, improve the quality, increase the ratio of fat and protein in hazelnuts. Healthier, abundant and quality efficiency is obtained from plants. Increase of Product will be between 12% and 28%.

2. TEA: The tea fields are most suitably fertilized as: The fertilization is realized with 200-300 ml EXTRASOL per decar along with 500 gr – 1 kg urea at 2-4 leaves phase arising with blasting of logs. (Preparation of solution: first, 500 gr – 1 kg urea is mixed into water and then 200 – 300 ml EXTRASOL solution is prepared in a separate contained and mixed together; this may be directly poured into the pump. This mixture is for 1 decar). The mixture is prepared with calculation according to storage volume. In case that the product is surplus, the plant is not burned out, but expenses arise. This mixture is prepared after each harvesting for tea. Benefits: The tea leaves will shine, and high efficiency is obtained from 14% to 28%; more delicious dry agents are obtained with more vitamins.

Note: In case that the fertilizing is realized before the fruits are collected, the strawberries will stay fresh during transportation and in the market for longer periods.

Pastures and forages
(clovers, grass, melilotus, purple clover, white clover)

1. Coating the seeds before seeding: 1 lt. kstrasol is prepared in 5-10 lt. water as a solution and mixed into seeds of 1 ton via spraying.

А. Purpose: Increase the percentage of sodding; ensuring vibrant and solid growth and protecting seeds from adverse weather conditions.а употреба: Потапяне на семената за 20-30 минути в 200мл. разтвор или 1 литър Екстрасол за 1 тон семена с 5-10 литра воден разтвор и проветряване.

В. Fertilizing time: 1-20 days before sowing. The seeds are ventilated after fertilization.

2. Fertilizing during growth:

А. The first fertilization is realized at 2-4 leaves phase, the other fertilizations are realized during branching or tilling phase with 200 ml e kstrasol water solution per 1 decar. After each cutting, the fertilization is realized.

B. Purpose: Faster, stronger, more, higher quality efficiency.

* In case that the seeds are processed when purchased, the e kstrasol does not prevent the effect of ekstrasol or the other processes.

Decay of residual plants with fertilization (chaff, stalk, sunflower, corn and other residues and grass)

1. Purpose: Ensuring decay of residues in 3-4 months with extrasol. 150-200 ml ekstrasol is prepared with water solution per decar. To increase the speed of decay, 4-5 urea is added into the solution.

А. Fertilizing time: Just after harvesting, the fertilization both decay the residues and prevent wintering for harmful residues.

Note: The solution amount depends on the machinery. The important thing is to use 150-200 ml ekstrasol per decar.